Renishaw RLI20-P Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 18

Renishaw RLI20-P Скачать руководство пользователя страница 2

© 2012-2015 Renishaw plc. All rights reserved.

This document may not be copied or reproduced in whole or
in part, or transferred to any other media or language, by any
means, without the prior written permission of Renishaw.

The publication of material within this document does not imply
freedom from the patent rights of Renishaw plc.

Disclaimer

RENISHAW HAS MADE CONSIDERABLE EFFORTS
TO ENSURE THE CONTENT OF THIS DOCUMENT IS
CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO
WARRANTIES OR REPRESENTATIONS REGARDING THE
CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER
ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.

Trademarks

RENISHAW

and the probe symbol used in the RENISHAW

logo are registered trade marks of Renishaw plc in the United
Kingdom and other countries.

apply innovation

and names and

designations of other Renishaw products and technologies are
trade marks of Renishaw plc or its subsidiaries.

Renishaw part no: M-9926-0005-02-B
Issued: 09 2015

All other brand names and product names used in this
document are trade names, trade marks, or registered trade
marks of their respective owners.

Care of equipment

The RLI20 laser interface contains precision electronic
components. Avoid exposure to moisture. Remove power before
connecting, disconnecting or handling.

Changes to Renishaw products

Renishaw plc reserves the right to improve, change or modify
its products and documentation without incurring any obligation
to make changes to Renishaw equipment previously sold or
distributed.

Warranty

Renishaw plc warrants its equipment provided that it is installed
exactly as defined in associated Renishaw documentation.

«
1
2
3
4
...
»

Содержание RLI20-P



















Отзывы:

Нет отзывов