RGH41 RGS40 installation guide
1
Product compliance
C
Renishaw plc declares that RGH41 complies with the applicable standards and regulations.
A copy of the EC Declaration of Conformity is available on request.
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that any changes or modifications not expressly approved by Renishaw plc or
authorised representative could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
NOTE:
This unit was tested with shielded cables on the peripheral devices. Shielded cables must be
used with the unit to ensure compliance.
RoHS compliance
Compliant with EC directive 2011/65/EU (RoHS)
Patents
Features of Renishaw’s encoder systems and similar products are the subjects of the following
patents and patent applications:
EP 1147377 JP 4571768 US 6588333
Further information
Further information relating to the RGH41 encoder range can be found in the RGH41
system
Data sheet (L-9517-9713). This can be downloaded from our website www.renishaw.com/encoder
and is also available from your local representative. This document may not be copied or reproduced
in whole or in part, or transferred to any other media or language, by any means without the written
prior permission of Renishaw. The publication of material within this document does not imply freedom
from the patent rights of Renishaw plc.
Disclaimer
RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS
DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES
OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY,
HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.
The use of this symbol on Renishaw products and/or accompanying documentation indicates that the product
should not be mixed with general household waste upon disposal. It is the responsibility of the end user to
dispose of this product at a designated collection point for waste electrical and electronic equipment (WEEE)
to enable reuse or recycling. Correct disposal of this product will help to save valuable resources and prevent
potential negative effects on the environment. For more information, please contact your local waste disposal
service or Renishaw distributor.
The packaging of our products contains the following materials and can be recycled.
Packaging Component
Material
ISO 11469
Recycling Guidance
Outer box
Cardboard
Not applicable
Recyclable
Polypropylene
PP
Recyclable
Inserts
Low Density Polyethylene Foam
LDPE
Recyclable
Cardboard
Not applicable
Recyclable
Bags
High Density Polyethylene Bag
HDPE
Recyclable
Metalised Polyethylene
PE
Recyclable