Step 11.
HANDLE ASSEMBLY SCPH-8 (Optional)
A. Inspect handle for distortion or damage.
B. Make certain that the retaining spirol pin is installed evenly and does not
project out from one side of the handle or the other. Refer to exploded
view.
WARNING: Replace handles that are damaged or distorted.
Step 11.
ASSEMBLY
After reassembly, check operation of clamp. All parts should move freely
without binding. Refer to exploded view for proper location of component
parts.
WARNING: All retaining pins and fasteners must be in place.
GENERAL
RENFROE products may be returned to the factory for inspection and refur-
bishment in accordance with an established fee schedule.
Use only RENFROE replacements parts. Refer to RENFROE catalog for in-
structions on ordering replacement parts.
WARNING: Do not weld, grind or modify the clamp body or component
parts in any manner. In the event the stenciling is worn and not legible
or the tag containing the model, capacity or other pertinent information
is missing - do not use clamp until it has been properly labeled. REN-
FROE will replace tag at no charge upon request.
