Renfert TOP spin, Руководство пользователя

Страница: 20 / 216

- 6 -
EN
3.3 Included in Delivery
1 Top spin
1 Stepped drill, size: large
1 Instructions for use
1 Allen key
1 Replacement threaded pin
1 Laser sticker set
3.4 Accessories
Item No. Description Size Drill Ø
5010 0198 Step drill, 3 pcs. small 1.98 mm
Drawing 1 5010 0200 Step drill, 3 pcs. medium 2.00 mm
5010 0202 *) Step drill, 3 pcs. large 2.02 mm
367 0157 Smart-Pin-drill, 3 pcs.. small 1.57 mm
Drawing 2 367 0159 *) Smart-Pin-drill, 3 pcs. medium 1.59 mm
367 0161 Smart-Pin-drill, 3 pcs. large 1.61 mm
*) Recommended for the Renfert Pin System. The drill sizes small, medium and large are available if the hole size should be
narrower or wider.
Drawing 1 Drawing 2
4. Installation
4.1 Unpacking
⇒ Take the unit and all the accessories out of the package.
⇒ Check to ensure all delivery parts are complete (compare section 3.3 “Included in Delivery”).
4.2 Setting Up
⇒ Place the unit on a level and stable base.
⇒ Decide which working position you require, Fig. 2 (see section 5.4).
4.3 Change laser warning label
⇒ Remove the laser warning label in your language from the sticker set
and stick over the present warning label (13, Fig. 1).
4.4 Electrical Connection
Prior to connection, check that the voltage data on the type plate matches the mains voltage.
⇒ Unroll the power cable and insert the plug into the socket.
Fig. 2