Renfert 276100 0000, Руководство пользователя

Страница: 25 / 360

Error Cause Corrective action
Advance stops for no
apparent reason and the
pressure discs return to
their home position.
• The controller has detected an over-
load�
• Material has hardened in the cartridge�
• Insufficient spindle lubrication.
• Impression material is too cold, Refer to the manufac-
turer’s processing instructions�
• Use a new cartridge�
• Lubricate the spindles (special grease!)�
The mixing program
LEDs are flashing while
the unit cover is open.
• No mixing program is selected� • Select the correct mixing program for the casting ma-
terial (see section 5�1�1)�
8 Technical Specifications
Item number
276100 0000
276100 2000
276100 1000 276100 3000
Mains voltage 230 V 120 V 100 V
Mains frequency: 50/60 Hz 60 Hz 50/60 Hz
Power consumption: 280 VA
Mains input fuse: 2 x T2AH 2 x T3,15 AH
Dimensions (height x width x length): 330 x 190 x 380 mm (13 x 7,5 x 15 inch)
Weight (empty): 7,0 kg
Noise level: < 70 dB(A)
Protection class I
9 Warranty
Provided the unit is properly used, Renfert warrants the all components of the duomix II mixing unit for a
period of 3 years �
Warranty claims may only be made upon presentation of the original sales receipt from the authorized
dealer� Parts which are subject to natural wear and tear (wear parts) and consumables are excluded from
the guarantee� These parts are marked in the spare part list�
The warranty is voided in case of improper use; failure to observe the operating, cleaning, maintenance,
and connection instructions; in case of independent repairs or repairs by unauthorized personnel; if spare
parts from other manufacturers are employed, or; in case of unusual influences or influences not in com -
pliance with the utilization instructions� Warranty service shall not extend the original warranty�
10 Disposal Information
10.1 Disposing of Consumables
Empty cartridges and tubular bags as well as used mixing nozzles must be disposed of in accordance
with the manufacturer’s instructions�
10.2 Instrument Disposal
The instrument must be disposed of by a specialist facility� This specialist facility must be informed of any
hazardous residue in the instrument�
10.2.1 Disposal Information for EU Nations
In order to maintain and protect the environment, to prevent environmental contamination and to improve
the reutilisation of raw materials (recycling), the European Commission has established guidelines ac-
cording to which manufacturers must take back electrical and electronic devices in order to forward them
to a regulated disposal or recycling system�
Within the European Union, devices identified with this symbol may therefore not be disposed of
with unsorted municipal solid waste.
For more information regarding proper disposal please apply at your local authorities�
Subject to alteration
en
- 11 -