background image

UM-WI-038 

 

DA16x00 Getting Started with AT-Command for 
AWS-IoT 

  

 

User Manual 

Revision 1.1 

13-Jan-2022 

CFR0012 

39 of 39 

© 2022 Renesas Electronics 

 

Important Notice and Disclaimer 

RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL SPECIFICATIONS AND 
RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER 
DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS 
ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, 
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. 

These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible for (1) selecting the 
appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets 
applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. Renesas 
grants you permission to use these resources only for development of an application that uses Renesas products. Other reproduction or use of 
these resources is strictly prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property. 
Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims, damages, costs, losses, or 
liabilities arising out of your use of these resources. Renesas' products are provided only subject to Renesas' Terms and Conditions of Sale or 
other applicable terms agreed to in writing. No use of any Renesas resources expands or otherwise alters any applicable warranties or warranty 
disclaimers for these products. 

© 2022 Renesas Electronics Corporation 

Corporate Headquarters 

TOYOSU FORESIA, 3-2-24 Toyosu 

Koto-ku, Tokyo 135-0061, Japan 

Contact Information 

www.renesas.com

 

https://www.renesas.com/contact/

 

Содержание UM-WI-038








































Отзывы: