Renesas Synergy™ Platform
Target Board Kit S1JA (TB-S1JA)
R12UM0025EU0101 Rev.1.01
Page 29 of 31
Apr.21.20
6. Certifications
The TB-S1JA meets the following certifications/standards. See the beginning of this User’s Manual for the
disclaimer and precautions.
6.1 EMC/EMI Standards
•
FCC Notice (Class A)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE- This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
•
CE Class A (EMC)
This product is herewith confirmed to comply with the requirmeents set out in the Council
Directives on the Approximation of the laws of the Member States relating to electromagnetic
Compatibility Directive 2004/108/EEC.
Warning
– This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be requried to take adequate measures to correct this
interference.
6.2 Material Selection, Waste, Recycling and Disposal Standards
•
EU RoHS
•
China SJ/T 113642014, 10-year environmental protection use period.
6.3 Safety Standards
•
UL 94V-0
7. Design and Manufacturing Information
The design and manufacturing information about the TB-S1JA board are available in the “TB-S1JA v1.3
Design Package” available on
•
Design package file name: tb-s1ja-v1.3-designpackage.zip
•
Design package contents
File Type
Content
File/Folder Name
File (PDF)
Schematics
tb-s1ja-v1.3-schematics
File (PDF)
Mechanical Drawing
tb-s1ja-v1.3-mechdwg
File (PDF)
3D Drawing
tb-s1ja-v1.3-3d
File (PDF)
BOM
tb-s1ja-v1.3-bom
Folder
Manufacturing Files
Manufacturing Files
Folder
Design Files
Design Files - Altium