Renesas RX111 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 27

Renesas RX111 Скачать руководство пользователя страница 4

How to Use This Manual

1. Purpose and Target Readers

This manual is designed to provide the user with an understanding of how to use the e

2

studio IDE to develop

and debug software for the RSK platform. It is intended for users designing sample code on the RSK platform,
using the many different incorporated peripheral devices.

The manual comprises of step-by-step instructions to load and debug a project in e

2

studio, but does not

intend to be a complete guide to software development on the RSK platform. Further details regarding
operating the RX111 microcontroller may be found in the Hardware Manual and within the provided sample
code.

Particular attention should be paid to the precautionary notes when using the manual. These notes occur within the body
of the text, at the end of each section, and in the Usage Notes section.

The revision history summarizes the locations of revisions and additions. It does not list all revisions. Refer to the text of
the manual for details.

The following documents apply to the RX111 Group. Make sure to refer to the latest versions of these
documents. The newest versions of the documents listed may be obtained from the Renesas Electronics Web
site.

Document Type

Description

Document Title

Document No.

User’s Manual

Describes the technical details of the RSK hardware.

User’s

Manual

R20UT2193EG

Tutorial

Provides a guide to setting up RSK environment,
running sample code and debugging programs.

RSKRX111 Tutorial
Manual

R20UT2194EG

Quick Start Guide

Provides simple instructions to setup the RSK and
run the first sample, on a single A4 sheet.

Quick

Start Guide

R20UT2195EG

Schematics

Full detail circuit schematics of the RSK.

RSKRX111
Schematics

R20UT2192EG

Hardware Manual

Provides technical details of the RX111
microcontroller.

Group

Hardware Manual

R01UH0365EJ

«
...
2
3
4
5
6
...
»

Содержание RX111




























Отзывы:

Нет отзывов