Renesas RX111 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 27

Renesas RX111 Скачать руководство пользователя страница 23

RSKRX111

7. Additional Information

R20UT2194EG0100 Rev. 1.00

Page 23 of 27

Jul 3, 2013

7. Additional Information

Technical Support

For details on how to use Cu, refer to the manual available on the DVD or from the web site.

Parts of the sample code provided with the RSKRX111 can be reproduced using the ‘Application Leading Tool’
(Applilet) code generator tool. Applilet can be downloaded from the Renesas website.
Source files and functions generated by Applilet are prefixed with ‘r_’ and ‘R_’, respectively.

For information about the RX111 series microcontrollers refer to the RX111 Group Hardware Manual.

For information about the RX assembly language, refer to the RX Family Software Manual.

Technical Contact Details

Please refer to the contact details listed in section 8 of the “Quick Start Guide”

General information on Renesas microcontrollers can be found on the Renesas website at:

http://www.renesas.com/

Trademarks

All brand or product names used in this manual are trademarks or registered trademarks of their respective
companies or organisations.

Copyright

This document may be, wholly or partially, subject to change without notice. All rights reserved. Duplication of
this document, either in whole or part is prohibited without the written permission of Renesas Electronics
Europe Limited.

© 2013 Renesas Electronics Europe Limited. All rights reserved.
© 2013 Renesas Electronics Corporation. All rights reserved.
© 2013 Renesas Solutions Corp. All rights reserved.

«
...
21
22
23
24
25
...
»

Содержание RX111




























Отзывы:

Нет отзывов