RX72M CPU Card with RDC-IC User's Manual
R12UZ0098EJ0100 rev.1.00
Page 7 of 27
Aug. 23, 2021
1. Specifications
Table 1-1 Specification of RX72M CPU Card with RDC-IC
Item
Specification
Product name
RX72M CPU Card with RDC-IC
Board product No.
RTK0EMXDE0C00000BJ
Supported inverter board
Inverter board (P/N: RTK0EM0000B10020BJ) included in Evaluation
System for BLDC Motor
or
Inverter board (P/N: RTK0EM0000B11020BJ) included in Evaluation
System for Stepping Motor with Resolver
Exterior view
Note: Appearance of actual product may differ from photo.
MCU
Product group
RX72M group
Product No.
R5F572MNDDBD
CPU max.
operating frequency
240 MHz
Bit count
32 bits
Package / Pin count LFBGA / 224 pins
ROM
4MB
RAM
1MB
MCU input clock
24MHz
Input power supply voltage
DC 5 V (
±
5%)
Selectable among the following:
•
Power supply from supported inverter board
•
Power supply from USB connector
Supported sensors
Resolver sensor, Hall sensor and encoder
Supported emulator
E2 On-Board (emulator on board)
Connectors
•
Emulator connector (USB)
•
Inverter board connectors x 2
•
Serial communication connectors
•
EtherCAT connector *1
•
Resolver sensor connector
•
Hall sensor connector
•
Encoder connector
•
2nd inverter connector (unmounted)
Switch
MCU external reset switch
LEDs
User control LEDs x 2
Operating temperature
Room temperature
Operating humidity
No condensation
*1 Use a cable less than 3 m in length to connect to the EtherCAT connector of this product. (Since the EMC test of this
product is conducted with the length of the cable to be connected specified as 3m or less)
