RX72M CPU Card with RDC-IC User's Manual
R12UZ0098EJ0100 rev.1.00
Page 10 of 27
Aug. 23, 2021
4. Usage
4.1
Flash Writing
This product is equipped with an on-board emulator circuit (flash programming circuit), which enables flash writing
without preparing a separate tool product. Connect the USB cable to CN13 (USB mini B connector) of the CPU card
and the USB connector of the PC, and write using an application such as Renesas Flash Programmer or e2studio. When
using Renesas Flash Programmer or e2studio, the on-board emulator circuit will be recognized as E2Lite, so make the
connection settings accordingly.
For details on how to use each application, please refer to the respective user's manual.
Figure 4-1 Cable connection for flash writing
4.2
Connecting CPU Card
Preparation
Prepare the following
・
Stabilized power supply:
Output voltage of DC24[V] or more, current limit of 1[A] can be set.
・
INV-BRD:
INV-BRD(RTK0EM0000B10020BJ) included in Evaluation System for BLDC
Motor or INV-BRD (RTK0EM0000B11020BJ) included in Evaluation System for
Stepping Motor with Resolver
・
Power supply cable:
Cables capable of carrying a current of 1[A] or more
Make sure that the INV-BRD is not powered on, and connect this product.
Figure 4-2 CPU Card Connection
