Renesas RTE7702500EAB00000J страница 11 Скачать руководство пользователя

Страница: 11 / 63

Emulation Adapter

Outline

R20UT5180EJ0110 Rev. 1.10

Page 1 of 63

Sep.12.22

1. Outline

This product is an emulation adapter for the RH850/U2B of MCUs from Renesas Electronics

Corporation. Using this product with the separately sold exchange adapter enables emulation of the

target device.

Features:

•

This product includes a debug chip for the RH850/U2B. The debug chip to be mounted differs with

the product type name of the target for debugging.



RTE7702500EAB00000J: R7F702Z20ADBG debug chip



RTE7702500EAB0B000J: R7F702Z2BADBG debug chip



RTE7702500EAB0K000J: R7F702Z2KADBG debug chip



RTE7702500EAB0L000J: R7F702Z2LADBG debug chip

•

The combination of the emulation adapter connected to the base board included in the package is

usable as a simple evaluation board.

•

Using the emulation adapter with the exchange adapter allows connection to the target system and

enables emulation of the target device.

•

Using the attached 34-pin to 46-pin conversion connector enables connecting emulators which

support Aurora tracing, such as the IE850A emulator (type name: RTE0T0850AKCT00000J) from

Renesas, and debugging.

•

Using the attached 14-pin to 34-pin conversion connector enables connecting the emulation adapter

to on-chip debugging emulators such as the E2 emulator (type name: RTE0T00020KCE00000R)

from Renesas and flash programmers.

•

The emulation adapter can operate as a stand-alone unit, i.e. without connection to an emulator.

1.1

Package Components

The package of this product consists of the following items. After you have unpacked the box, check if

your emulation adapter contains all of these items.

Table 1-1 Package Components for the Emulation Adapter

Item

Quantity

Emulation adapter: RTE7702500EAB00000J, RTE7702500EAB0B000J,

RTE7702500EAB0K000J, or RTE7702500EAB0L000J

Base board: RTE7702500EABBB000J

14-pin to 46-pin conversion adapter: RTE0T00020KCA40000J

34-pin to 46-pin conversion adapter: RTE0T0850AKCA00000J

Power-supply cable

Demounting lever

Jumper blocks for pin headers (for JP7 and JP8 of the emulation adapter and JP22 and

JP23 of the base board)

Содержание RTE7702500EAB00000J
































































Результаты поиска

Содержание RTE7702500EAB00000J

Отзывы:

Похожие инструкции для RTE7702500EAB00000J

Бренды по названию

Популярные бренды

Renesas RTE7702500EAB00000J, Руководство пользователя

Результаты поиска

Содержание RTE7702500EAB00000J

Отзывы:

Похожие инструкции для RTE7702500EAB00000J

Бренды по названию

Популярные бренды