Renesas RSSK, Руководство пользователя

Страница: 20 / 64

Renesas Solution Starter Kit for RX23W 4. Smart Configurator Using the e
2
studio
R20UT4449EG0100 Rev. 1.00 Page 20 of 64
Aug.30.19
Click the ‘Add component’ icon. In ‘Software Component Selection’ dialog -> Type, select ‘Drivers’.
Select ‘Compare Match Timer’ then click ‘Next’. In ‘Add new configuration for selected component’ dialog ->
Resource, select ‘CMT2’ as shown in Figure 4-13 below then click ‘Finish’.
Figure 4-13 Select Resource – CMT2
Navigate to the ‘Config_CMT2’ and configure CMT2 as shown in Figure 4-14 . This timer is configured to
generate a high priority interrupt after 200ms. This timer is used as our long switch de-bounce timer later in
this tutorial.
Figure 4-14 Config_CMT2 setting