Renesas Synergy™ Platform
Application Example for Cloud Connectivity (AE-CLOUD2)
R12UM0033EU0100 Rev.1.00
Page 15 of 48
Sep 5, 2018
4.4.4 On-Board LEDs
The S5D9 MCU board provides 3 on-board LEDs for user-defined functions. A fourth LED is used to indicate 3.3V
power presence. The LEDs are connected to general purpose output pins through a single resistor. The output active
state is 1. The table below describes the mapping between the LEDs and the ports that drive them.
Table 6 LED to Port Mapping
LED
Number
Color
Designator
Device Port/Pin
1
Green
LED1
P7_8
2
Yellow
LED2
P7_10
3
Red
LED3
P7_11
4
Green
LED4
N/A (Power indicator)
Figure 13 shows the schematic of the user LEDs.
Figure 13 LED Schematic
4.4.5 USB Device
This USB Micro-B connection jack connects the S5D9 MCU to an external USB 2.0 Host,
Full Speed capable. The USB power presence (VBUS) is wired to GPIO input P4_7 after it
is passed through resistor divider.
Table 7 USB Device Connector to S5D9 MCU Pin Mapping
USB Device Connector
S5D9 Microcontroller
Pin
Description
Pin
Description
1
VBUS, +5VDC
P4_7/USB_VBUS
USB Voltage detection
2
Data-
USB_DM
Negative data line
3
Data+
USB_DP
Positive data line
4
USB ID, jack internal switch, cable inserted
-
(Not connected)
5
Ground
VSS
Circuit Ground
