RX24T CPU Card
User’s Manual
R20UT3696EJ0120 Rev.1.20
Page 11 of 25
Feb. 21, 2019
5. Usage
5.1
Quick Start
5.1.1
Preparation
Obtain the Motor RSSK, and perform the steps described in 5.1.1 and 5.1.2 of section 5.1, Quick Start, of the user’s
manual (R20UT3697EJ).
5.1.2
Replacing the CPU Card
Confirm that the INV-BRD is powered off, remove the RX23T-CRD from the INV-BRD, and connect the product in its
place.
Figure 5.1 Replacing the CPU Card
5.1.3
Preparation for Operation Test
Perform the steps described in 5.1.3 to 5.1.5 of the Motor RSSK user’s manual (R20UT3697EJ) to prepare for motor
drive.
5.1.4
Operation Test
Perform the steps described in 5.1.6 to 5.1.9 of the Motor RSSK user’s manual (R20UT3697EJ) in the order indicated,
turn on the power supply, enable motor rotation, change the motor rotation speed, and stop motor rotation.
5.1.5
Finishing the Operation Test
After the operation test is finished, confirm that the motor shaft is no longer rotating and turn off the stabilized power
supply output.
(2) Make sure the inverter board
connectors are correctly
aligned, and mount the RX24T
CPU card.
(1) Remove the RX23T CPU card.
Motor RSSK
RX24T CPU card
RX23T CPU card
