User's Manual
R20UT2886EJ0100 Rev.1.00
Page 8 of 9
Jan 20, 2014
Appendix Compliance Sheet
CAUTION
This is a Test- and Measurement equipment with possibility to be significantly altered by user through hardware
enhancements/modifications and/or test or application software. Thus, with respect to Council Directive
2004/108/EC (Directive on compliance with the EMC protection requirements), this equipment has no autonomous
function. Consequently this equipment is not marked by the CE-symbol.
EEDT-ST-005-20
CAUTION
This equipment should be handled like a CMOS semiconductor device. The user must take all precautions to avoid
build-up of static electricity while working with this equipment. All test and measurement tool including the
workbench must be grounded. The user/operator must be grounded using the wrist strap. The connectors and/or
device pins should not be touched with bare hands.
EEDT-ST-004-10
For customers in the European Union only
The WEEE (Waste Electrical and Electronic Equipment) regulations put responsibilities on
producers for the collection and recycling or disposal of electrical and electronic waste.
Return of WEEE under these regulations is applicable in the European Union only.
This equipment (including all accessories) is not intended for household use. After use the
equipment cannot be disposed of as household waste, and the WEEE must be treated, recycled
and disposed of in an environmentally sound manner. Renesas Electronics Europe GmbH can
take back end of life equipment, register for this service at http://www.renesas.eu/weee
Device files and sample code download(*1)
For target boards the device files and ready-to-use sample
Application(s) are available for download from the Renesas
TOOLWEB,www.renesas.eu/update.
Please mark “Target-Board/Adapter” as tool type and then
Select your target board from the list of products.
*1: Applicable in the European Union Only.
