Renesas R0E436640CPE00 Скачать руководство пользователя

Страница: 13 / 102

R0E436640CPE00 User’s Manual

Terminology

REJ10J0918-0300 Rev.3.00 February 15, 2007

Page 13 of 102

Terminology

Some specific words used in this user's manual are defined as follows:

Emulator R0E436640CPE00

This means a compact emulator for H8/300H Tiny Series (this product).

MCU board R0E436640EPBM0

The MCU board R0E436640EPBM0 with an evaluation MCU.

Emulator system

This means an emulator system built around the compact emulator R0E436640CPE00. The emulator system is configured with

an emulator main unit, compact emulator R0E436640CPE00, emulator debugger (Debugger Package for H8/300H Tiny

Series) and host machine.

Emulator debugger Debugger Package for H8/300H Tiny Series

This means a software tool which starts up in the integrated development environment High-performance Embedded

Workshop to control the emulator.

Integrated development environment High-performance Embedded Workshop

This tool provides powerful support for the development of embedded applications for Renesas microcomputers. It has an

emulator debugger function allowing for the emulator to be controlled from the host machine via an interface. Furthermore, it

permits a range of operations from editing a project to building and debugging it to be performed within the same application.

What’s more, it supports version management.

Firmware

This means a program stored in the flash ROM of the emulator. It analyzes contents of communication with the emulator

debugger and controls the compact emulator R0E436640CPE00. This program is downloadable from the emulator debugger to

upgrade firmware or to support other MCUs.

Host machine

This means a personal computer used to control the emulator main unit and compact emulator.

Target MCU

This means the MCU you are going to debug.

User system

This means a user's application system using the microcomputer to be debugged.

User program

This means the program you are going to debug.

Evaluation MCU

This means the MCU mounted on the compact emulator which is operated in the specific mode for tools.

In this user's manual, this symbol is used to show active Low. (e.g. RESET#: Reset signal)

Содержание R0E436640CPE00







































































































Результаты поиска

Содержание R0E436640CPE00

Отзывы:

Похожие инструкции для R0E436640CPE00

Бренды по названию

Популярные бренды

Renesas R0E436640CPE00, Руководство пользователя

Результаты поиска

Содержание R0E436640CPE00

Отзывы:

Похожие инструкции для R0E436640CPE00

Бренды по названию

Популярные бренды