background image

VII 

 

WARNING

 

Warnings for AC Power Supply: 

 

 

 

If the attached AC power cable does not fit the 

receptacle, do not alter the AC power cable and do not 
plug it forcibly. Failure to comply may cause electric 
shock and/or fire. 

   

 

Use an AC power cable which complies with the safety 

 

standard of the country. 

   

 

Do not touch the plug of the AC power cable when your 

 

hands are wet. This may cause electric shock. 

     

 

This product is connected signal ground with frame  

    ground. If your developing product is transformless (not 
    having isolation transformer of AC power), this may cause 
    electric shock. Also, this may give an unrepairable  
    damage to this product and your developing one. 

      While developing, connect AC power of the product to  

    commercial power through isolation transformer in order 
    to avoid these dangers. 

     

 

If other equipment is connected to the same branch  

    circuit care should be taken not to overload the circuit.  
    Refer to nameplate for electrical ratings. 

 

 When installing this equipment, insure that a reliable 

ground connection is maintained. 

 

Содержание PLQP0176LB-A









































Отзывы: