Renesas M3A-0040, Инструкция по эксплуатации

Страница: 11 / 18

6
5.2.4 Multiplex bus mode
Switch SW1 of the M3A-0040 board to “MULT” when using as multiplex bus mode. Use D1/AD1-D7/AD7 of
CN2 as address line share with data line. Keep open A1-A6 of CN3. Use #21-pin (A7/ALE) of CN3 as ALE.
5.3 Using M3A-0040 as a peripheral
When the M3A-0040 is operated as a peripheral controller, please pay attention to following notes:
(1) Set JP6 to "PERI"
(2) Connect a USB host, such as a PC to CN1
(3) To connect a USB host to CN1, an adapter is needed to convert the A-plug into the B-receptacle.
(4) CN5 is not available as a peripheral.