Renesas M34286T2-CPE, Руководство пользователя

Страница: 40 / 70

M34286T2-CPE User’s Manual 3. Usage (How to Use the Emulator Debugger)
R20UT0214EJ0200 Rev.2.00 Page 40 of 70
Sep 16, 2010
(2) Setting the Init dialog box (2/2)
By pressing [OK] after setting the Init dialog box (1/2), the following Init dialog box will be displayed.
Selecting the target MCU
Select the target MCU that you are going to
debug.
Selecting the System Clock
Select the system clock that you are going to set
within the user program.
Default: System clock is used at f(XIN)/8.
CCK or Default : System clock will be changed from
f(XIN)/8 to f(XIN)/1 by the CCK
instruction.
CCK2 or Default: System clock will be changed from
f(XIN)/8 to f(XIN)/2 by the CCK2
instruction.
CCK4 or Default: System clock will be changed from
f(XIN)/8 to f(XIN)/4 by the CCK4
instruction.
IMPORTANT
Note on selecting the system clock :
•
When selecting System Clock in the INIT dialog, be sure to select the same system clock as those to be
specified in the user program.
If the system clock you select is different from the setting on the user system, the emulator will not
work properly. When the emulator does not work properly, quit the emulator debugger. Then, before
restarting the emulator debugger, be sure to turn off the power of the emulator and turn it on again.