AN9910 Rev.1.00
Page 5 of 6
June 2001
ISL5217EVAL1
TABLE 1. JUMPER CONFIGURATION
JUMPER
TYPE
POSITION
DEFAULT
FUNCTION
JP1
On/Off
On
Off
Enables SYNCO as the CAS-SYNC0 J3-39 Output.
Off
Disables SYNCO as the CAS-SYNC0 J3-39 Output.
JP2
On/Off
On
Off
Enables UPDA as the CAS-SYNC0 J3-39 Output.
Off
Disables UPDA as the CAS-SYNC0 J3-39 Output.
JP3
3-Point
Off
2-3
Disables the 217-CLK Input
1-2
Enables BIT-CLK as the 217-CLK Input
2-3
Enables CLK2 as the 217-CLK Input
JP4 (Note)
3-Point
Off
2-3
Disables the BIT-CLK Input
1-2
Enables the input of BIT-CLK from the CAS-OUT-CLK J3-19.
2-3
Enables the output of CLK3 to the CAS-OUT-CLK J3-19.
JP5 (Note)
3-Point
Off
2-3
Disables the BIT-CLK Input
1-2
INVALID
2-3
Enables the U6 or J11 CLK Input.
JP6 (Note)
3-Point
Off
2-3
Disables the CAS-IN-CLK Input
1-2
Enables the 50
termination through R13.
2-3
Enables the output of CLK3 as the CAS-IN-CLK J1-19.
JP7
3-Point
Off
2-3
25-50MHz Frequency Range Select for prog. clk
1-2
15-30 MHz Frequency Range Select for prog. clk
2-3
40-110 MHz Frequency Range Select for prog. clk
JP8
3-Point
Off
Off
Selects Normal Mode for CPLD-PROG
1-2
Selects Program Mode for CPLD-PROG
2-3
Selects Normal Mode for CPLD-PROG
JP9
3-Point
Off
1-2
Disables the DAC-CLK Input Signal
1-2
Enables CLK as the DAC-CLK Input signal
2-3
Enables ISTRB as the DAC-CLK Input Signal
JP10
3-Point
Off
Off
Select “0” for BADDR3
1-2
Select “0” for BADDR3
2-3
Select “1” for BADDR3
JP11
3-Point
Off
Off
Select “0” for BADDR2
1-2
Select “0” for BADDR2
2-3
Select “1” for BADDR2
JP12
3-Point
Off
Off
Select “0” for BADDR1
1-2
Select “0” for BADDR1
2-3
Select “1” for BADDR1
JP13
3-Point
Off
Off
Select “0” for BADDR0
1-2
Select “0” for BADDR0
2-3
Select “1” for BADDR0
J9-13 to J9-14
On/Off
On
On
Selects TDO-CPLD for TDO.
Of
TDO Not Routed on Board.
NOTE: Jumpers 4-6 have other possible combinations, as detailed on the schematic for Master/Slave configurations of multiple evaluation CCAs.
