Renesas HS7124EDB01H, Руководство пользователя

Страница: 23 / 76

9
1.4.1 Configuration of the Main Unit of the Debugging MCU Board
The names of each section of the debugging MCU board are explained below.
Top of the Main Unit of the Debugging MCU Board (1)
(a)
(b)(c)
(d)
Figure 1.3 Top of the Main Unit of the Debugging MCU Board (1)
(a) External power LED: Marked ‘BOARD POWER’. This LED is lit while external power is
being supplied from the power cable.
(b) User VCC LED: Marked ‘USER VCC’. This LED is lit while power is being supplied
from the user system to the VCC pin of the MCU.
(c) User AVCC LED: Marked ‘USER AVCC’. This LED is lit while power is being supplied
from the user system to the AVCC pin of the MCU.
(d) Reset LED: Marked ‘RST’. This LED is lit while the reset signal is being input to
the MCU.