Rendamax R40 ECO страница 13 Скачать руководство пользователя

Страница: 13 / 72

Installation

Boiler transport

The R40 ECO is a fully equipped

compact heating system, which has

been pre-set and tested at the factory.

The dimensions of the packaging are:

- 70, 100, 120:

1200 x 800 x 670 mm (WxHxD)

This makes it possible to transport all

models in one piece through a normal

door. The boiler can be picked up

sideways or from the front with a forklift

truck for transport.

The R40 ECO can be transported

with a crane. However, it must be

ensured that the boiler is attached in

its packaging to a pallet. Loading belts

should be attached to the pallet.

Unpacking instructions are printed on

the cardboard box. Please follow the

proposed steps.

Disassembly of panelling

The panelling has been packed

separately from the boiler in the

packaging. The panelling of the

boiler should be set aside, before the

assembly and until the boiler is taken

into operation, so as to avoid damage.

Panelling should be attached and

secured with the supplied screw,

after assembly of the boiler, or after

maintenance works.

Lifting and carrying precautions:

- Lift only a manageable weight, or

ask for help.

- When lifting the boiler, bend the

knees, and keep the back straight

and feet apart.

- Do not lift and twist at the same

time.

- Lift and carry the boiler close to the

body.

- Wear protective clothing and gloves

to protect from any sharp edges.

Содержание R40 ECO









































































Результаты поиска

Содержание R40 ECO

Отзывы:

Похожие инструкции для R40 ECO

Бренды по названию

Популярные бренды

Rendamax R40 ECO, Руководство по эксплуатации

Результаты поиска

Содержание R40 ECO

Отзывы:

Похожие инструкции для R40 ECO

Бренды по названию

Популярные бренды