Renault R&Go, Руководство пользователя

Страница: 39 / 170

GB.35
PAIRING, UNPAIRING A TELEPHONE
(4/6)
Pairing a Bluetooth® phone with the
audio system from the audio system
This method allows you to make a
Bluetooth® search from the audio
system.
To pair a phone using this method, per-
form the following steps:
– activate
your telephone’s
Bluetooth®;
– press 32 to access the main menu;
– select “Settings”, then “Phone set-
tings” using 33 or 34 and confirm
using 35 ;
Radio with display on the
instrument panel
Bluetooth® connection
To activate the audio system’s
Bluetooth® function:
– press
32 to access the main menu;
– select “Settings”, “Phone settings”
then “Bluetooth®” using 33 or 34
and confirm using 35 ;
– select “ON” using 33 or 34 , then
confirm using 28 . The Bluetooth®
symbol will then appear continuously
in the status bar 21 on the screen.
Scan devices
Pair device
Select device
Pairing a phone
To use your hands-free system, pair
your Bluetooth® mobile phone with
the vehicle. Check that the Bluetooth®
of your phone is activated and set its
status to “visible”.
Pairing will enable the hands-free
phone system to recognise and store a
phone.
You can pair up to 6 phones, but only
one can be connected at a time.
Pairing can be performed either via the
audio system or via your phone.
Your audio system and phone must
both be switched on.
Note: if you pair a new telephone when
another telephone is already connected
to the audio system, this latter will be
disconnected and replaced by the new
paired telephone.
For safety reasons, carry
out these operations when
the vehicle is stationary.