2.28
ENG_UD18935_2
Régulateur-limiteur de vitesse : fonction régulateur (X95 - B95 - D95 - Renault)
ENG_NU_837-6_BDK95_Renault_2
Jaune
Noir
Noir texte
Putting the function on
standby
The function is suspended when you:
– press switch
4
(O);
– depress the brake pedal;
– depress the clutch pedal or shift into
neutral if the vehicle has an auto-
matic gearbox.
In all three cases, the cruising speed re-
mains stored, it is no longer displayed in
zone
6
and the message “Memorised”
along with the stored speed will appear
on the instrument panel.
Standby is confirmed when zones
A
,
B
and
C
go out.
Exceeding the cruising speed
The cruising speed may be exceeded
at any time by depressing the acceler-
ator pedal. The cruising speed flashes
on the instrument panel along with the
illumination of zone
C
in red.
Then, release the accelerator: after a
few seconds, the vehicle will automati-
cally return to its set cruising speed.
Cruising speed cannot be
maintained
If driving up or down a steep gradient,
the system is unable to maintain the
cruising speed: the stored speed on the
instrument panel will flash and zone
C
will light up in red to inform you of this
situation.
CRUISE CONTROL/SPEED LIMITER: cruise control function
(3/4)
Adjusting the cruising speed
The cruising speed may be changed by
pressing the following repeatedly:
– switch
2
(+) to increase the speed;
– switch
3
(-) to decrease the speed.
The cruise control function
is in no way linked to the
braking system.
A
b
C
6
2
3
5
4
Содержание MEGANE
Страница 1: ...DRIVER S HANDBOOK MEGANE ...