Renault KADJAR 2021, Руководство пользователя транспортного средства

Страница: 118 / 334

2.8
ENG_UD71289_3
Fonction Stop and Start (HFE - Renault)
Conditions for coming out of
engine standby
For automatic gearboxes:
– the brake pedal is released, position
D or M engaged;
or
– the brake pedal is released, position
N engaged and the parking brake re-
leased;
or
– the brake pedal is pressed again,
position P engaged or position N
engaged with the parking brake ap-
plied;
or
– position R is engaged;
or
– the accelerator pedal is depressed;
or
– in manual mode, the gear lever is
moved towards + or - .
For manual gearboxes:
– the gearbox is in neutral and the
clutch pedal is slightly depressed;
or
– the engine is in gear and the clutch
pedal is pressed right down.
FUNCTION STOP AND START
(2/4)
Preventing the engine from
standing by
In certain situations, such as negotiat-
ing a crossroads for instance, it is pos-
sible (with the system activated) to keep
the engine running so as to be ready to
move off quickly.
Automatic gearbox:
Keep the vehicle stationary without
pressing too hard on the brake pedal.
Manual gearbox:
Keep the clutch pedal pressed right
down.
Special note:
depending on the vehi-
cle, if you switch off the ignition when
the engine is on standby, the warning
light
Ä
is displayed for a few sec-
onds on the instrument panel.
For vehicles equipped with a
manual gearbox
The restart may be interrupted if the
clutch pedal is released too quickly
while a gear is engaged.
If the engine stalls while the system
is in operation, pressing the clutch
pedal right down will start it again.
The engine must be
switched off for refuelling
(and not just on standby
for vehicles equipped with
the Stop and Start) function: it is es-
sential to switch off the engine com-
pletely (please refer to the informa-
tion on “Starting and stopping the
engine”).
Fire hazard.