5.4
ENG_UD7489_1
Bloc-outils (X95 - J95 - R95 - Renault)
ENG_NU_840-2_JR95_Renault_5
tOOLS/HuBcaP
(2/2)
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
12
a
B
c
D
Wheel trim
Remove it using hubcap tool
4
by en-
gaging the hook in the recess provided
next to valve
12
(to attach the metal
clip).
To refit the hubcap, align it with valve
12
.
Push the retaining hooks in fully, start-
ing with side
A
near the valve, followed
by
B
and
C
, finishing at
D
opposite the
valve.
note:
if you are using anti-theft bolts,
refer to the information on “Changing a
wheel”.
Location of the wheel change
tool kit
5-seater version
Lift luggage compartment carpet
10
.
Attach it using hook
9
. The tools are in
kit
11
.
10
11
9