Renaissance eZee, Руководство по установке

Страница: 4 / 12

Axle nut
Washer
Spacer washer
Wire protector
If disc not required, then depending on supplied
hardware either a) install washers under set of
xmm screws or b) install shorter xmm set of screws
Remove original front
wheel from bicycle
Insert the hub motor wheel
into the front fork, ensuring
that it is properly seated in
the dropout slots
Left
Right
Tightening
Assembly
Hub Motor Installation
Install disc rotor
onto hub motor using
screws provided
Axle nut
Lock washer
Washer
Spacer washer
Securing and aligning the axle hardware
Yes
Yes
No
No
Side view
with disc rotor
Tighten your axle nut firmly so the axle does
not spin out and your wheel does not fall off
(approx. 50 Nm)
Axle spin out: undesirable
Severed
Motor Cable
Normal Axle
Spacer washer missing and large
washer not sitting flat because
it is hitting a quick release lip Spacer washer doesn’t fit
in quick release recess,
requires filing the dropout
Axle spinout can happen if
nut is not adequately tightened,
washer stack does not sit flat,
or axle is not properly seated
Tightening assembly
must sit flat
Dropouts
splayed open
-OR-
Install with disc Installation without disc