Remuc Remuc-3, Руководство пользователя

Страница: 39 / 42

39 REMUC-3 User Manual
Device ID query (QR)
Returns the device identifier (QR code)
QR
Setting the APN
Sets the access point network for data connection. Needs manual setting in cases
REMUC’s default APN list does not work.
SET APN <ADDRESS>
Examples:
SET APN M2M
SET APN INTERNET
VARIABLE VALUE DESCRIPTION
PORT 1, 2, H, V, A 1,2 = OUT1, OUT2
H = W-BUS, Webasto heating
V = W-BUS, Webasto ventilation
A = Alarm control
STATE
ON, OFF
RUNNING_TIME 0-65534 Running time in seconds. If not given, output is
on for default duration. In case when outputs 1
or 2 are controlled and running_time is “0”,
stays on until manually switched off. Outputs H
and V will stay on the maximum time defined
by Webasto heater.
START_DELAY
0-65534 Start delay in minutes. If not given or ”0”,
output will switch immediately.