Remuc Remuc-3, Руководство пользователя

Страница: 11 / 42

11 REMUC-3 User Manual
5. Connect the installation cable
Tarvittavat kytkennät riippuvat asennuskohteesta.

When replacing Webasto timer, insert Webasto
timer cable in Remuc
Webasto connector . Only
use button is required from the Remuc cable
set.

In case of a WBUS-controllable Webasto,
connect WBUS (PIN2) to Webasto heater’s
WBUS line. Connect also supply voltage (PIN9)
and ground (PIN1).

For voltage-controlled devices (for example
Eberspächer) use OUT1 or OUT2 (PIN10 or
PIN11). Connect also supply voltage (PIN9) and
ground (PIN1).
Remuc can be configured to control vehicle ventilation. In this case connect Output 2
(PIN11) to car ventilation control. This enables user to control ventilation either
simultaneously with or separately from heating.
Attention: In multi-battery systems Remuc must be connected to same battery as
the car heater.
6. Attach device identification label
Device ID label is needed when pairing mobile application
with Remuc controller.
Attach the sticker to a place
where it can be scanned using phone camera , for
example to car A- or B-pillar, side of dashboard or on fuse
compartment lid. The other label can be attached on the
cover of this manual.