22
direction. Find the direction providing the best reception by
adjusting the antenna direction before mounting the ZXT-310.
Note 2: No screws are provided for mounting to a wall.
Note 3: Before mounting to a wall, be sure to fully read the precautions.
1.
Obtain
two
screws
suitable
for
the
wall
strength
and
material.
The
screw
size
is
shown
in
the
figure
below.
2.
The
positional
relationship
between
the
ZXT
‐
310
key
holes
and
the
screw
mounting
positions
are
shown
in
the
figure
below.
Note 1: When mounting the screws to the wall, leave a space
between the wall and screw cap as shown in the figure.
3.
Insert
the
ZXT
‐
310
key
holes
onto
the
two
screws
mounted
to
the
wall,
and
then
slide
downward
to
secure
in
place.
4.
After
securing
the
ZXT
‐
310
to
the
wall,
connect
the
AC/DC
adaptor
and
cables
to
the
ZXT
‐
310.
Note 1: Check that the ZXT-310 is firmly secured to the wall.
Note 2: Insert the AC/DC adaptor and IR emitter cable so that
they are firmly connected to the ZXT-310.
5.
When
removing
the
ZXT
‐
310
from
the
wall,
lift
up
the
ZXT
‐
310,
then
pull
it
towards
you.
