Remotec ZRP-200, Руководство пользователя

Страница: 6 / 9

ZRP-200
Blue Purple Red
2 When it has finish, it will light up
the indicator 5 second accordingly.
Blue = Excellent
Purple = Good
Red = Poor
Reset to Factory Default
Press and Hold “PROG” button for 3 seconds on Z-Wave Slim Repeater, the indicator will light up Purple
Color. DO NOT Release the “PROG” Button until indicator change back to Blue color and flashes TWICE.
Remark : All the Setting and Data will be permanently deleted.
Please use this procedure only when the network primary controller is missing or otherwise
inoperable.
Required Power Source

DC 5V 1A ITE Approved Regulated USB Power Adaptor (Not Included)
Installation Location Tips

Avoid installed near the metallic objects

Install the ZRP-200 about 1.5m at least above the floor. Setting it on a higher position can provide a
better signal repeating capability

Avoid installing above or near hot surface or equipment. Avoid installing the device where it will be
exposed to direct sunshine.
WARNING
- Indoor Use Only
- Used only with ITE approved USB Power adaptor
Technical Specifications
Model no.
BW8180US (ZRP-200US)
BW8180EU (ZRP-200EU)
BW8180AU (ZRP-200AU)
BW8180JP (ZRP-200JP)
BW8180KR (ZRP-200KR)