- 6 -
E4L
E4
H
L
H
L
RC210
90
68
120
68
RC220-RC265
90
110
120
110
RC270-RC280,
RC88
100
160
130
160
RCG90-RCG100 155*
200*
185*
200*
Tabell 14pt bold
Bold på rubriker uppe, allt under ska vara regular.
Allt utom spalten med RC-förteckningar ska vara
centrerat i våg och lodrätt. RC-spalten ska vara
vänsterlagd.
Strl på texten varierar beroende på utrymme men
10pt är standard
www.rotork.com www.remotecontrol.se
3. After manual operation, leave the lever as it is. It will
automatically return to the previous stage of manual op-
eration by the internal Hand / auto Decluting System when
the actuator is powered on.
4.If the lever does not stand straight even if you pull it in
trying to manually operate the actuator due to some prob-
lems during the actuator operation, you have to check the
possibillity of Jamming.
What is Jamming effect?
It is when worm gear is pressed by the stopper bolt and
gear does not move. The lever and the handles will not
move at this point.
Manual Mode
1. When you pull the lever located on the side of actuator
handle toward the handle, the lever stands straight. If you
turn the handle in that condition, the actuator moves.
2.If the lever does not stand straight when you pull the
lever toward the handle, turn the handle halfway while
pulling the lever toward the handle.
●
Turn the handle clockwise for CLOSE
●
Turn the handle counter clockwise for OPEN
Limit Setting
1. Pull the lever located on the side of the handle toward
the handle to make it stand straight and the turn the
handle clockwise to fully close the actuator
2) CH1 BUTTON ON
↕
ON
OFF
NO
NAME
1
FAIL CLOSE
2
FAIL OPEN
3
A FULL
4
CH1
5
CH2
6
REV
7
Full Close Output Control
8
Full Open Output Control
3) 0V INPUT
ZERO Button
PUSH
←
4) 10V INPUT
SPAN Button
PUSH
←
5) CH1 BUTTON OFF
↕
ON
OFF
