Remo Racing – Kosmic Owner’s Knowledge Packet –
www.kosmickartaustralia.com
4 |
P a g e
1B. Rear Seat Struts
Each Kosmic Kart is supplied with two (2) supplemental seat struts, one (1) for each side.
The extra seat struts are designed to be fixed atop the rear axle cassette and then fastened to the seat
with the provided hardware. A good place to start is using one (1) on each side.
Many drivers prefer to use two (2) on each side, which will effectively force more direct-pressure
from the driver’s weight transfer on the rear tyres. This will consequently improve grip to the rear of
the chassis.
By removing seat struts you allow for the rear of the chassis to release and spring off the track easier.
This can be an added benefit when attempting to improve the chassis performance during corning.
Be careful though, by removing seat struts, the initial cornering may improve, but the potential to
create an over-steer on exist will become more prevalent as well as the overall balance of the chassis.
Remo Racing has several lengths of seat struts, so don’t rush it, get the right size!
Part Number
Product Description
0006.280
Supplementary Seat’s Support 280mm
0006.300
Supplementary Seat’s Support 300mm
0006.320
Supplementary Seat’s Support 320mm
0006.340
Supplementary Seat’s Support 340mm
0006.380
Supplementary Seat’s Support 380mm
0006.400
Supplementary Seat’s Support 400mm
0007.340
Supplementary Bent Seat’s Support 340mm
