5.4 Activate heating and cooling
cycle, examples
Example for activating a heating cycle
1. Retrospective enabling of a heating cycle.
Fig. 51: Activate heating cycle
Activation of further heating cycles is only possible
in the expert level. To do so, activate the expert
level with the password "0321" and select the fol-
lowing parameters:
Settings
"
Basic settings
"
System configuration
In the "System configuration" level, set the required
heating cycle from "deactivated" to "activated".
After activation, the cycle is now enabled and can
be set in the "User" level and in the "Expert" level
of the connected heating cycle configuration. For
this purpose, implement the changes with the grey
slide controls as described in the chapter "Setting
the heating/cooling operating mode".
The REMKO Smart-Control Touch controller
can control max. one unmixed and four mixed
heating cycles!
Example for activating a cooling function
Change operating mode of a heating/cooling cycle.
Fig. 52: Activating cooling cycle
The operating mode
n
Heating
n
Cooling
n
Heating/cooling
can be changed at any time in the respective acti-
vated heating cycles under the parameter "Oper-
ating mode".
97
