Make the connection as follows:
1.
Remove the screws [A] und [B], which are
behind of the cover (see Fig. 46).
2.
You can now fold up the unit cover [C] (see
Fig. 47).
3.
Connect the control line provided by the cus-
tomer to the terminals [D] (see Fig. 48).
4.
Re-assemble the unit.
A
B
Fig. 46: Remove the screws
C
Fig. 47: Fold up the unit cover
D
Fig. 48: Connecting the indoor unit
8.3 Connecting the outdoor unit
Proceed as follows to connect the line:
1.
Remove the side-panel cover.
2.
Choose a cable-section according to the rele-
vant specifications.
3.
Connect the lines as shown on the electrical
connection diagram.
4.
Fix the line in the strain relief and re-
assemble the unit.
Fig. 49: Connecting the outdoor unit
41