REMKO MXV 200, Операция, Технология, Запасные части.

Страница: 16 / 28

Cleaning the housing
1. Disconnect the power supply to
the unit.
2. Open the air intake grill on the
front side and fold it upward.
3. Clean the grill and housing
using a soft, damp cloth.
4. Reconnect the power supply
again.
Air filter for indoor unit
Clean the air filter at intervals of
no more than 2 weeks. Reduce this
interval in case of heavily soiled air.
Cleaning the filter
1. Disconnect the supply voltage
to the equipment.
2. Open the front side of the unit
by folding the grill upward and
letting it engage
(Fig. 1) .
3. Lift the filter up slightly and pull
it out from underneath. (Fig. 1) .
4. Clean the filter with a regular
vacuum cleaner (Fig. 2) .
To do so, turn the dirty side
upward.
5. Any dirt can also be removed
carefully with lukewarm water
and mild cleaning agents
(Fig. 3) .
To do so, turn the dirty side
downward.
6. If water is used, let the filter
dry out properly in air before
replacing it in the unit.
7. Carefully insert the filter. Ensure
it locates correctly.
Cleaning the condensation
pump (optional equipment)
An optional integrated or separate
condensation pump may be in the
indoor unit, which pumps out any
accumulated condensation into
higher positioned drains.
Observe the care and maintenance
guidelines in the separate
operating instruction manual.
1 Fold up the guard 2 Clean with a vacuum cleaner
3 Cleaning with lukewarm water
8. Close the front side as
described above but in reverse
order.
9. Switch the supply voltage back
on.
10. Switch the unit back on.
REMKO MXW
16