manualshive.com logo in svg

REMKO MXT 264, Инструкции по эксплуатации и монтажу, Страница: 10 / 44

Поделиться
Скачать
REMKO MXT 264 Скачать руководство пользователя страница 10

3 

Design and function

3.1  Unit description

The indoor unit on the split-design compact wall

chests serves to extract heat from the indoor room

being cooled. The outdoor unit then expels this

heat to the outside.

If combined heating/cooling units are operated as

heaters, the heat absorbed by the outdoor unit can

be discharged by the indoor unit into the room

being heated.

The unit is designed to be mounted high up on the

wall, in an indoor area. It is operated by an infrared

remote control.

The indoor unit consists of a fin evaporator, evapo-

rator fan, controller and condensate tray. The

indoor unit can be combined with REMKO outdoor

units from the MVT 603 DC-1403 DC range that

provide sufficient combination options. The outdoor

unit is controlled by the regulation of the indoor

unit.

Condensate pumps are available as accessories.

 

 

B

A

4

5

6

1

2

3

7
8
9

3

Fig. 2: System layout

A: Outdoor area

B: Indoor area

1: Indoor unit

2: Outdoor unit

3: Condensate drainage line

4: Condenser fan

5: Power supply

6: Shut-off valve

7: Suction pipe

8: Control line

9: Injection pipe

Refrigerant piping is used to connect the indoor

unit to the outdoor unit.

2

1

4

3

Fig. 3: Cooling cycle schematic

1: Evaporator

2: Evaporator fan

3: Suction pipe connection

4: Injection pipe connection

 

 

 

REMKO MXT series

 

 

10

Содержание MXT 264













































Отзывы:

Нет отзывов