REMKO MVW 222, Инструкции по эксплуатации и монтажу

Страница: 14 / 40

13
“Swing” key
Switches the automatic upward and downward
movement of the air discharge fin on and off.
14
“Eco” key
Turns the power save mode on (if fitted).
15
“Timer on” key
Sets the time after which the unit is to switch on.
16
“Timer off” key
Sets the time after which the unit is to switch off.
Remote control display
2
1
4
3
10
5
11
6
7
8
9
Fig. 10: Indicators on the LCD
1
Temperature
Shows the currently set setpoint.
2
Operating mode
Shows the currently active operating mode.
3
ECO
Appears when the power save function is active.
4
Electric auxiliary heater
Appears when the electric auxiliary heater is active
(not fitted).
5
Low-noise operating mode
Appears when the Low-noise operating mode is
active.
6
Unit status
Appears when the unit is switched on.
7
Signal transmission indicator
Appears briefly during signal transmission to the
indoor unit.
The illustration of the LCD with all of the sym-
bols present is only intended to provide a
clearer overview. During operation, only those
symbols relevant to the respective functions
appear on the display.
Set or change operating modes
Switch unit on or off
1.
Press the key. The symbol for the active
unit status appears on the display of the IR
remote control . The unit switches itself on.
2. Press the key again. The symbol disap-
pears and the unit switches off.
REMKO MXV series
14