REMKO MVW 222, Инструкции по эксплуатации и монтажу

Страница: 10 / 40

Alarms are indicated by a code (see chapter
Troubleshooting and customer service).
NOTICE!
Immediately replace flat batteries with a new
set, otherwise there is a risk of leakage. It is
recommended that the batteries are removed if
the equipment is shut down for longer periods.
Help save on energy consumption in stand-by
mode! If the device, system or component is not
in use, we recommend disconnecting the power
supply. Components with a safety function is
excluded from our recommendation!
Connection of the optional wired remote con-
trol KFB-3
The wired remote control, type KFB-3, can be con-
nected to the devices of the series MXV 221-451.
You need the connection cable that is part of the
delivery scope of the wired remote control for this.
The indoor units are ready to be plugged in for
connection.
The mating connector on the indoor unit can be
found below the electrical connection (Fig. 4). The
plug is colour-coded with the letters A to D.
Fig. 4: Connection KFB-3
REMKO MXV series
10