REMKO MD 261, Операция, Технология, Запасные части.

Страница: 7 / 32

"FAN" button
Press this button to set the
required fan speed.
4 settings are available:
automatic, high, medium and
low fan speed.
"SLEEP/TURBO" Button
Pressing this button will
automatically increase or
decrease the target temperature
by 1 °C within an hour in
cooling and heating mode
respectively.
With the TURBO function, the
the maximum fan speed can be
activated.
"SWING" Button
This button directly activates
the oscillating function of the
fins for better air distribution in
the room.
"AIR DIRECTION" Button
With this button, the desired fin
position can be set. There are
5 positions and an oscillating
function available.
"TIMER-ON" Button
This button serves to program
the automatic activation time
for the device within the next
24 hours.
"TIMER-OFF" Button
This button serves to program
the automatic switch-off time
for the device within the next
24 hours.
Buttons on the remote control
"ON/OFF" Button
Press this button to start the
unit.
"MODE" button
Press this button to select the
operating mode. The indoor unit
has 5 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
2. Cooling mode
In this mode, the warm room
air is cooled to the desired
temperature.
3. Dehumidifying mode
In this mode the room is mainly
dehumidified, the adjusted
temperature is retained.
4. Heating mode
In this mode, the warm air in
the room is warmed up to the
desired temperature.
5. Circulation mode
In this mode, the air in the room
is recirculated.
Temperature selection is not
possible.
Button "
▲"
With this button, the desired
temperature can be increased
up to 30 °C.
Button "
▼"
With this button, the desired
temperature can be reduced
down to 17 °C.
Buttons on the remote control
7