Air filter for indoor unit
Clean the air filter at intervals of no more than 2
weeks. Reduce this interval if the air is especially
dirty.
1
2
Fig. 18: Filter removal
Cleaning the filter
1.
Disconnect the power supply to the unit.
2.
If necessary remove the unit's cover.
Observe the following section "Removal of
the unit's cover".
3.
Fold the filter downwards [1] and pull it out
towards the front [2].
4.
Clean the filter with a commercially available
vacuum cleaner (Fig. 19). To do so, turn the
dirty side so it is facing upwards.
5.
Dirt can also be removed by carefully
cleaning with lukewarm water and mild
cleaning agents (Fig. 20). The dirty side
should be face down.
6.
If water is used, let the filter dry out properly
in the air before fitting it back into the unit.
7.
Carefully insert the filter. Ensure that it
locates correctly.
8.
Switch the power supply back on.
9.
Switch the unit back on.
Fig. 19: Cleaning with a vacuum cleaner
Fig. 20: Cleaning with lukewarm water
Cleaning the condensate pump (accessories)
An optional integrated or separate condensate
pump may be in the indoor unit, which pumps out
any accumulated condensate into higher posi-
tioned drains.
Observe the care and maintenance instructions in
the separate operating manual.
Cleaning the air-side components
1.
Disconnect the power supply to the unit.
2.
Clean all components such as ducts and
grills using suitable cleaning agents including
anti-bacterial agents if appropriate.
3.
Switch the power supply back on.
In certain types of use the units and compo-
nents are subject to a special hygiene mainte-
nance and inspection requirement.
REMKO KWK series (DM)
32
Содержание KWK 135 EC
Страница 39: ......
