REMKO KP8, Инструкция по эксплуатации, Страница: 4 / 12

4
REMKO
KP8 CONDENSATE PUMP
Carefully read the operating manual
before placing the unit in service for
the first time. It provides useful tips,
notes and hazard warnings to prevent
injury and material damage. Failure
to follow the directions in this manual
can endanger persons, the environment
and the equipment itself and will void any
claims for liability.
■
Keep this manual in the vicinity of
the units.
■
Only qualified personnel may set up
and install the units and components.
■
The set-up, connection, and operation
of the unit and its components
must take place in accordance with
the operating conditions stipulated
in this manual and comply with
all applicable local regulations.
■
Modification of the units or
components supplied by REMKO
is not permitted and can cause
malfunctions.
■
Units and components may not
be operated in areas where there
is an increased risk of damage.
Observe the minimum clearances.
Safety notes
■
The electrical power supply is
to be adapted to the requirements
of the units.
■
The operational safety of the units
and components is only assured
if they are fully assembled and used
as intended. Safety devices may not
be modified or bypassed.
■
Do not operate units or components
if there are obvious defects or signs
of damage.
■
The units and components must
be kept at an adequate distance from
flammable, explosive, combustible,
abrasive and dirty areas or
atmospheres.
■
Installation, repair and maintenance
work may only be carried out
by authorised specialists. Visual
inspections and cleaning can
be performed by the operator as
long as the unit is disconnected from
the power.
■
Take appropriate precautions when
performing installation, repair
or maintenance work or cleaning
the unit to make sure the unit does
not pose a danger to persons.