Outdoor sensor
The connection of an outdoor sensor is always
required for Smart Control.
n
Mount the outdoor sensor pointing skyward, in
a north-easterly direction, about 2.5 metres
above the ground. It may not be subjected to
direct sunlight and is to be protected against
excessive wind. Installation above windows or
air ducts is to be avoided.
n
In order to carry out the installation, remove the
cover and secure the sensor with the screw
provided.
n
A cable with wire cross-sections of min. 0.5
mm² is recommended for connecting the
sensor.
Fig. 5: Outdoor sensor (figure similar)
REMKO HTS
12
