5
Operation
Remote control display
6
1
2
4
5
8
7
3
9
Fig. 3: Remote control display
The remote control display is realised through the
corresponding symbols on the touch display.
1
Days of the week
2
Setpoint
Is displayed if the room temperature is set.
3
Room temperature
Is displayed if the room temperature is displayed.
4
Automatic mode, time program active
In this case, no time programs of the Smart-Control
Touch are active.
5
Manual mode, no time program
6
Heating/cooling
7
Present or absent
It is possible to enter up to 6 heating times per day.
8
Room set/actual temperature
9
Time
Keys for the remote control settings
10
11
12
13
14
Fig. 4: Keys on the remote control
The remote control is operated using the relevant
keys on the touch display.
10
“On / off” key
Activation of the room temperature regulation. If
the display is switched off, anti-freeze protection
mode is active
11
“M” key
Switching from manual mode to present/absent
mode (time program). The following symbols
appear:
- “Manual” = manual mode
- “Clock” = time program
12
“Clock” key
Using this key it is possible to select and set the
hours, minutes and days of the week (1-7). To con-
firm and continue, press the “clock” key.
13
and the
14
"arrow” keys
To set the room temperature touch the “Up/down”
arrow keys [13 and 14]. The “Set” symbol is dis-
played and the set temperature is displayed. After
the setting is implemented, the display jumps from
“Set” back to the home symbol and the current
room temperature is displayed.
Key lock
To prevent accidental adjustment or access by
unauthorised persons, it is possible to lock the dis-
play. Press the “Clock” key [12] and the “Up arrow”
[13] at the same time for 5 seconds. If the key lock
is activated a padlock symbol appears on the right
next to the time.
9