Thank you for choosing REMINGTON
®
. Our products are
designed to meet the highest standard of quality, functionality
and design. The model you have chosen can be used in or out
of the shower and is designed to provide a gentle, close shave.
Please read the instructions for use carefully and keep in a safe
place for future reference.
CAUTION
USE THIS APPLIANCE ONLY FOR ITS INTENDED USE AS
DESCRIBED IN THIS MANUAL.
DO NOT USE THIS PRODUCT IF IT IS NOT WORKING CORRECTLY,
IF IT HAS BEEN DROPPED OR DAMAGED, OR DROPPED INTO
WATER.
DESCRIPTION
A
. Shaving head
B
. Head release button
C
. Flexible outer foils
D
. Flexible trimmer with comfort tips
E
. Massaging strip
F
. On/Off switch
G
. Battery compartment
H
. Bikini trimmer headguard
I.
Cleaning brush
GETTING READY
Please be patient when first using your shaver, as with any
new product, it may take a little while to familiarize yourself
with the device. If you take the time to acquaint yourself
with your shaver, we are confident you will receive years of
enjoyable use and complete satisfaction.
INSERTING BATTERIES
Your shaver requires 2 ‘AAA’ alkaline batteries (first set
included). We recommend that you use Rayovac® batteries
for optimal performance.
1. Make sure the product is turned off.
2. Rotate the battery compartment cap approximately 1/4 turn
counter-clockwise and pull.
3. Insert 2 “AAA” alkaline batteries, so that the (+) and (-)
symbols on the battery align with the corresponding mark in
the battery compartment.
4. Place cap back on unit using the alignment marks and rotate
clockwise until the cap snaps into place.
NOTE: Your shaver will not work if the batteries are inserted
incorrectly.
NOTE: Remove batteries if the unit is not in use for long periods
How To Use
How To Use
Register Your New Product Today!
By registering your new Remington
®
product you will receive these important benefits:
Proof of ownership • Product protection • Product registration • Special offers
Register online at: RemingtonProducts.com
smooth silky
Product Features
FOR LONGER HAIRS
If you have not shaved for a while, use the flexible trimmer
before shaving. This will help you achieve a more effective
shaving result.
1. Turn on shaver.
2. Hold the shaver with the trimmer facing your leg and slightly
tilted towards you (approximately at a 45º angle).
3. Move the trimmer slowly against the direction of the
hair growth.
4. After shaving, turn off shaver.
TRIMMING AND SHAPING
1. Attach the bikini trimmer headguard.
2. Turn on shaver.
3. Hold the shaver at a right angle to your skin and press
down gently.
4. Edge and shape the area as desired.
5. After shaving, turn off shaver.
FOR BEST SHAVING PERFORMANCE
We recommend that you use your new shaver daily for two
or three weeks to allow time to find the optimum shaving
methods for your particular type of hair growth patterns.
CAUTION
If your skin is easily irritated by shaving, or you suffer from
skin allergies, you should test a section of your arm or leg
before using the shaver.
Your shaver is suitable for legs, underarms and the bikini area.
It can be used dry or in the shower.
FOR EVERYDAY USE
1. Remove headguard.
2. Turn the shaver on.
3. Hold the shaver at a right angle to your skin and move the
shaver against the direction of the hair growth.
4. After shaving, turn shaver off.
N
OTE:
■
The shaver IS suitable for use in the bath or shower.
■
Do not rinse with water hotter than 160ºF.
■
Do not completely submerge the shaver in water.
■
Before dry shaving, make sure that the area is clean, dry and
free from creams or oils.
(C)
(A)
(D)
(E)
(F)
(B)
(G)
(H)
(I)
WDF-4815
Use and Care Guide
Cleaning & Maintenance
CARE FOR YOUR SHAVER
To ensure long lasting performance of your shaver,
clean the head assembly regularly. The easiest and the
most hygienic way to clean the shaver is by rinsing the
shaving head after use with warm water. Always keep
the protective headguard on the shaving head when
the shaver is not in use.
AFTER EACH USE
1. Ensure the shaver is turned off.
2. Press the release button to open the shaver head.
3. Blow on the foils to remove any loose debris.
4. Brush or rinse the accumulated hair from the
main body of the shaver, shaving head and cutter
assembly.
5. Leave the head assembly open to let the shaver dry completely.
6. Return the shaving head to its original position and snap in
place.
NOTE:
■
Ensure that the shaver is turned off when cleaning.
■
Do not clean the shaving foils with the brush.
■
At regular intervals, put a drop of sewing machine oil onto the
foils, trimmers, and cutters head for continued performance.
