NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
© 2014, Pinnacle Products International, Inc.
Turbo Electric Fan Heater User’s Manual
Maintenance
&OHDQLQJDQG0DLQWHQDQFH
–
Before cleaning the appliance, disconnect it
from the outlet and let it cool down.
–
The enclosure is easy to get dirty. Wipe it
RIWHQZLWKDVRIWVSRQJH)RUYHU\GLUW\SDUWV
ZLSHZLWKDVSRQJHGLSSHGLQ)ZDWHU
and mild detergent, then dry the heater
enclosure with a clean cloth. Be careful not to
let the water enter the inside of the appliance
–
In order to protect the enclosure, do not
splash water onto the heater, and never
use a solvent like gasoline, isoamyl acetate,
toluene, etc. to clean the heater.
2SHUDWLRQ
*URXQGLQJ,QVWUXFWLRQV
REM-515-120:
–
This heater is for use on 120 Volts. The
cord has a plug as show at A (below). An
adapter as shown at C is available for
connecting three-blade grounding-type plugs
two-slot receptacles. The green grounding
lug extending from the adapter must be
connected to the permanent ground such as
a properly grounded outlet box. The adapter
should not be used if a three-slot grounded
receptacle is available.
REM-53-240:
–
This heater is for use on 240 (or 208) volts.
The cord has a plug as shown in D (below).
No adapter is available for this blade
FRQ¿JXUDWLRQDQGQRQHVKRXOGEHXVHG7KH
type outlet is a 240 (or 208) volt grounding
outlet. When properly installed, it provides a
ground connection through the cord to the
heater to protect the operator from electric
shock.
8
B
A
D
C
Grounding Means
Grounding Pin
Metal Screw
Grounding Methods
)LJXUH
