Remington Power R2000AU, Инструкция по использованию и уходу

Страница: 11 / 14

11
WARNING:
• Only the detachable shaving head can be rinsed with water.
• DO NOT rinse the hand-held shaver under water as damage will occur.
REPLACING THE HEAD & CUTTERS
Please refer to the FEATURE table on page 5 of this manual that lists the
correct replacement part number for your shaver.
It is very important to replace your head and cutters when necessary to
ensure a close, comfortable shave without irritation. We recommend they
be replaced every 12 months. Here are some signs of head and cutter wear,
indicating that replacement is needed:
•
Irritation: As the heads get excessively worn you may experience
some skin irritation. This would be especially noticeable when you
apply moisturizing lotion.
•
Pulling:
When the cutters wear you may feel a sense of pulling and a
loss of closeness when you shave. This is an indication that it is time
to replace your heads and cutters.
Replacement heads & cutters may be obtained from your local retailer, or
directly from Remington
®
. Simply fill out the enclosed accessory order form
- refer to page 8 & 9, or alternatively your order can be processed over the
phone via the Remington
®
Service Hotline.
We suggest you use local waste management centres to recycle this
product at end of life.