5
TO REMOVE HAIR FROM EYEBROWS
•
Attach the vertical linear trimmer.
•
For trimming, attach one of the attachment combs onto the vertical linear trimmer.
•
Gently guide the cutting unit to stray, unwanted hairs along the eyebrow line or
protruding from the eyebrow itself.
•
To remove the hairs completely, remove the attachment comb and lower the
trimmer onto the skin and move over the desired area.
•
Use slow and well-controlled movements.
TO REMOVE HAIR FROM EAR
•
The vertical trimmer or rotary trimmer (NE3850) can be used for trimming ear hair.
•
Insert the cutting unit gently into the outer ear canal opening.
•
Gently rotate the trimmer in a circular motion.
•
Avoid inserting the cutting unit more than 6mm into your ear canal.
TO SHAPE SIDEBURNS AND BEARD LINES (NE3870)
•
Hold trimmer with detail trimmer blade (NE3870) facing you.
•
Start with edge of beard/moustache line and gently lower the trimmer blade onto
your skin. Use motions towards edge of beard/moustache line to trim to desired
locations in facial area and away from beard in neck area.
TO TRIM SIDEBURNS AND OTHER FACIAL HAIR AREAS (NE3870)
•
The detail trimmer (NE3870) comes with an adjustable comb to trim sideburns and
other facial hair areas to any length between 1 and 5mm.
•
To attach the comb onto the detail trimmer (NE3870), ensure the trimmer blade is
facing away from you and then slide the guide comb over the back of the trimmer
blade until fitted securely.
•
Hold the trimmer with cutting blade facing you.
•
Use a small comb to lift the hairs. Hold the comb at the desired beard or moustache
length.
•
Move the trimmer along the comb to cut the hairs. Use light pressure and
well-controlled movements to trim hair.
CARE FOR YOUR TRIMMER
•
Care for your product to ensure a long lasting performance. We recommend that
you clean your trimmer after each use.
•
For best results, keep trimmer running while running it under the tap. Allow water
to run through the washout port and over the blades. Press the Active BladeClean
system button while rinsing to flush water through the blades.
•
Dry off excess water.
•
Do not submerge in water as damage will occur.
Содержание Nano NE3850
Страница 2: ...m n g i j k f e l...
