4
CLEANING
• Cleaning the beard trimmer attachment: brush away and blowout hair clippings from cutting
system, attachment, and top of groomer handle.
NOTE:
The full size trimmer attachment is permanently lubricated. If you do rinse this attachment
with cool or warm water (never use hot water) then it will need to be re-lubricated with light-grade
oil or sewing machine oil (1-2 drops over the cutters).
• Cleaning the foil shaver attachment: remove the foil head by pressing the button on the front
of the foil shaver attachment. Gently tap the foil head to remove excess clippings (never use a
brush on the foil). Blow away hair clippings from the cutter. Replace foil head onto the shaver
attachment by gently snapping into place.
ATTACHING THE GROOMING ATTACHMENTS
• The trimmer attachments are removed by rotating anticlockwise and lifting off.
• Insert the required attachment and rotate clockwise to lock into position.
• The Adjustable Beard Comb attachment has 8 Length settings: 1-8mm (in increments of
1mm). Begin with a higher numbered setting. Adjust cutting length as desired once you are
familiar with using the groomer, it is better to select a longer hair length setting in order not to
trim too much hair.
TIPS FOR BEST RESULTS
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before using your groomer. Comb your hair in the direction that it grows.
• Remove the Adjustable Beard Comb attachment if you are: defining hairline edges such as
sideburns, trimming the nape of your neck, trimming your beard line on front of neck.
• Before trimming beards, comb your hair in the direction that it grows so that the hairs are at
their maximum height and facing in the same direction.
• Since all hairs do not grow in the same direction, you may want to try different trimming
methods (i.e. upwards, downwards or across). Practice is best for optimum results.
NOTE:
Use slow light pressure. Too much pressure may trim off more hair than desired.
NOTE:
The foil shaver is designed to shave the detailed areas around your beard, moustache and
sideburns. It is not designed to shave your entire face.
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical
and electronic goods, appliances marked with this symbol must not be disposed of with
unsorted municipal waste, but recovered, reused or recycled.
BATTERY REMOVAL
The battery must be removed from the appliance before it is scraped. The appliance must be
disconnected from the supply mains when removing the battery. Unplug groomer from the outlet
to avoid risk of electrical shock. Pry the upper housing from the product with a flat head
screwdriver. This will expose the batteries. Remove the batteries from the product, contact your
local authorities for proper disposal. The battery is to be disposed of safety.
